RPI’s revolutionary Trap & Treat^® approach was designed to remove contamination quickly, safely, and effectively.  Trap & Treat^® products are installed by RPI-Group Approved Installers, who provide turnkey installations (products and injection labor included).  Learn more about RPI-Group here.

Consultants or property owners who wish to use an injection contractor that is not currently an RPI-Group member must consult with an RPI-Group member regarding the project design. Your contractor will be contacted by an RPI-Group member who will communicate the proper procedures and equipment necessary for a successful installation. After consultation with RPI-Group, your contractor may be invited to begin the training process. In the scenario just described, consultants or property owners would buy the products from RPI-Group members only.

Process

All Trap & Treat^® products are mixed with water to form a slurry, which is either injected into the subsurface using traditional direct push technology and pumps or placed directly into source area excavations. We recommend that pumps generating at least 300-500 psi of downward pressure be used.

Safety

All Trap & Treat^® products are safe and non-toxic…while not recommended, you could sprinkle them on your food and come away unscathed! Though our products are easy to clean off of work surfaces, they will soil clothing and cover skin with a fine black powder. For this reason, RPI recommends that installers wear suits and dust masks made of Tyvek^® or comparable materials.

Suggested Equipment

• Direct push rig
• Pumping system
• Water and mixing tanks (mixers)
• Dust masks, hearing protection, Tyvek^® suits, etc.

For more information on suggested equipment, click here.

Installation Guides

Installation Guides are available to learn about recommended procedures and practices with the injection process. Click here to access our free Installation Guides.

Project Assessments

RPI and members of RPI-Group provide Project Assessments at no charge; just fill out the appropriate form and return to the entity of your choice:

Eastern United States AST Environmental: Duane Guilfoil 859.846.4900 Email | Web	Western United States Alpine Remediation: Theresa Sorrells 303.277.0857 Email | Web	European Union Ejlskov A/S: Palle Ejlskov +45 87 31 00 61 Email | Web
	Resource Geoscience: Jonathan Whitacre 719.635.0229 Email | Web Vista Geoscience: John Fontana 303.277.1694 Email | Web Vironex: Scott Wisher 303.423.2547 Email | Web
Certified T&T Consultants LT Environmental, Inc. (LTE): Tom Harp 303.962.5513 Email | Web Resource Geoscience: Tom Lewis 719.635.0229 Email | Web A.G. Wassenaar, Inc.: Joe Pieterick, P.G. 303.759.8373 ext. 273 Email | Web	Specialty Contractors Weathered Bedrock Applications The Well Improvement Company: Ray Boyle 800.876.3722 Email | Web

You can also submit a Project Assessment to RPI by emailing Bob Elliott.

• Chlorinated Solvents (BOS 100^®)
• Hydrocarbons (BOS 200®)